View source for X950 software

{{GD Template Impl}}

==Raspbian==
Please refer to here: [[File:DAC-setting-raspbian.pdf]]

==[https://volumio.org/get-started/ Volumio]==
* Write SD card image and boot Pi.
* connect from web browser to volumio.local
* Select the top right hand side (burger) menu and select PLAYBACK OPTIONS.
* Turn on "I2S DAC" and select "ST400" under“DAC Model.” Then reboot and you are done.

[[File:Volumio-1.png|800px]]

[[File:Volumio-2.png|800px]]

==[http://www.moodeaudio.org/ Moode Audio Player]==
* Connect from web browser to moode.local
* Select configure from the pull down menu, then system.
* Within the Audio section select the device you have (such as 'SupTrnonics x400') and press SET
* Within the same selection make sure you set the volume to around 20% (not 100%) and press SET
* Select reboot

Once reconnected….
* Select configure from the pull down menu and then MPD
* Within Setting, select volume control - hardware and then APPLY
* Select reboot

[[File:Moode-1.png]]

[[File:Moode-2.png|815px]]

==[http://www.runeaudio.com/ RuneAudio]==
* Write SD card image, boot Pi.
* login into the Pi via ssh as root (password rune) and edit /boot/config.txt to select the IQaudio Pi-DAC+ devicetree overlay. Save and reboot
* Connect from web browser to runeaudio.local
* Select the pull down settings menu and select MPD, here change audio interface to IQaudIO DAC, beneath this select Volume control: enabled-hardware
* Press SAVE AND APPLY

==[http://openelec.tv/get-openelec  OpenElec]==
* Download Stable Openelec 6.0.3 image from http://releases.openelec.tv/OpenELECRPi2.arm-6.0.3.img.gz
*  Write image to SD card
*  Boot Openelec
*  SSH into the Raspberry PI and edit config.txt to include the device tree
*  mount -o remount,rw /flash
*  nano /flash/config.txt
<pre>
  # audio interfaces
  dtoverlay=iqaudio-dacplus
  # optional hardware interfaces
  dtparam=i2s=on
</pre>
*  Once above changes have been made, then ctrl+x to save.
*  mount -o remount,ro /flash
*  reboot
'''NOTE (Feedback from one of our customer):''' 
using the latest version of Raspbian Pi OS, 'dtoverlay=iqaudio-dacplus' does not work, but choose 'dtoverlay=rpi-dac' it works fine

==OSMC==
TBD

==Max2Play==

Please refer to: https://www.max2play.com/en/forums/topic/there-is-a-new-audio-case-geekworm-dacpi-works-with-max2play/

==RoPiee==
It works with RoPieee just pick "Audio HAT: IQandIO Pi-DAC(+/PRO/Zero)" and I using Spotify and it playing real good sounds very good.

==LibreElec==
Selecting "IQDac" on LibreElec to make it work

==Picoreplayer==
for the picoreplayer the correct hardware is the '''Audiophonics ISabre Q2M'''

hw:CARD=DAC,DEV=0              - I-Sabre Q2M DAC, I-Sabre Q2M DAC i-sabre-codec-i2c.1-0048-0

Thanks to '''Ignace Sannen''' <!-- ignace.sannen@gmail.com-->


<!--Add review function! -->
<comments />

<!--Please choose the  -->
<!--Remove other categories, just keep the appropriate categories -->

[[Category:Product Manual]]
[[Category:Raspberry pi]]
[[Category:Knowledge]]