View source for X1300 Hardware

==Required hardware==
The X1300 is only one accessory in the usage scenario, to complete the basic functionality, other accessories such as a [[HT-PD27W |PD27W power supply]], a Raspberry Pi 5 motherboard, a PCIe PIP boards((such as [[X1001]],[[X1002]],[[X1003]],[[X1000]], [[M901]], [[N400]], [[N300]])) or an SD card may be required.


When you choose PCIe PIP boards, pay attention to the height of the copper pillars installed in the X1300 accessories. The height of the copper pillars used in the X1300 is 17mm. You need to avoid using the same height as the PCIe PIP board.
==Hardware installation==
[[File:X1300-V1.0-IMG-7645-install.jpg|800px]]

Return to [[X1300]]

<!--Add review function! -->
<comments />