View source for X1206

{{GD Template Impl}}
==Safety Instructions & Warnings==
* <span class="tb_red">You must read these safety instructions and warnings before charging your batteries. 
* <span class="tb_red">Lithium Polymer and Li-ion batteries are volatile. Failure to read and follow the below instructions may result in fire, personal injury and damage to property if charged or used improperly.  
* <span class="tb_red">Never make wrong polarity connection when charging and discharging battery packs. Always double check polarity of battery's connector to make sure "+" to "+" and "-" to "-".  
* <span class="tb_red">Do not mix and use old batteries and new batteries, or batteries with different brand names.  
* <span class="tb_red">Lithium batteries has it's cycle life, please replace old battery with new one when it reaches it's service life or when it is two year old, whichever comes first.  
* <span class="tb_red">When charging Battery Pack, please put battery in a fire proof container. Please don't leave the UPS shield on the wood material or carpet and unattended.

==Overview==
This '''X1206''' is an ultra-compact advanced uninterruptible power supply expansion board designed specifically for the Raspberry Pi 5. It features a 4-cell Lithium 21700 battery holder, supporting up to 10,000mAh (with 4 cell 21700 batteries), with its advanced features and robust power backup capabilities, the X1206 is perfect for even the most demanding Raspberry Pi setups.

{{Raspberry Pi 5 UPS Sets}}

'''Reliable Power Backup:''' The X1206 provides a stable '''5.1V 6000mA''' power backup, ensuring uninterrupted operation of your Raspberry Pi. Whether you are running resource-intensive applications or powering multiple peripherals, the X1206 delivers reliable and consistent power supply.

'''Enhanced Power Management:''' One of the standout features of the X1206 is its enhanced power management system. It intelligently monitors the power status of the Raspberry Pi and automatically cuts off power when the Pi is shut down. This helps optimize battery life by entering an ultra-low standby power consumption mode. It ensures efficient operation and maximizes the lifespan of the UPS battery.

'''Seamless Power Switching:''' Equipped with AC power loss and power adapter failure detection, the X1206 seamlessly switches to backup power in the event of a power outage or power adapter failure. This feature guarantees that your Raspberry Pi remains operational and protected from unexpected power disruptions.

'''Convenient Features:''' The X1206 offers convenient features such as '''auto power-on''' and '''always power-on''', enabling your Raspberry Pi to automatically boot up when power is restored. It also supports full power-off from software, allowing you to safely shut down your Raspberry Pi without manual intervention.

'''Fast Charging:''' With fast charging capabilities of up to 3000mA, the X1206 ensures quick recharging of the UPS, making it ready to provide backup power whenever needed.

'''Versatile Design:''' The X1206 is designed to be attached on bottom and don't use the 40-pin header, enabling easy stacking with other Raspberry Pi accessory boards. This versatility allows you to expand the functionality of your Raspberry Pi and create enhanced applications tailored to your specific needs.

'''Seamless Data Backup:''' The X1206 is compatible with our range of storage products such as [[X1001]],[[X1000]],[[X1004]] top pips etc, providing seamless integration for safe and reliable data backup. Your valuable data remains protected, even in the event of a power failure.

Enhance the reliability and performance of your Raspberry Pi 5B with the X1206 UPS expansion board. Experience peace of mind with its advanced features and robust power backup capabilities. Trust the X1206 to ensure uninterrupted operation and safeguard your valuable data.

'''<span class="tb_red">What is the difference between [[X1206]] and [[X1202]]:</span>'''
*X1206 uses a wide voltage power input (9V-18V);
*Solves the overheating problem of DC jack power supply
*Uses a higher capacity '''21700''' lithium battery to provide longer power supply time; 
* The power supply capacity through the DC jack is greatly increased from 5.5A of [[X1202]] to 10A

==Features==
{| class="wikitable"
|- 
|'''For use with''' || Raspberry Pi 5 Only
|-
| '''UPS Output''' || 
* Provides continuous operation for up to 10 hours (duration depends on battery type and applications)
* Supports a maximum current output of '''5.1V 6000mA''', suitable for most Raspberry Pi applications
* Integrated Advanced Power MOSFET with an equivalent of 7mΩ RDS(ON) to minimize power loss
* Convenient pogo pin connection for powering the Pi, eliminating the need for cabling and soldering
* Equipped with XH2.54 connectors and two USB sockets for 5V power output (Share 6000mA current output)
|-
| '''Battery Charging''' || 
* Supports fast battery charging with a upto 3000mA current
* Battery charging control can be managed via GPIO
* Provides protection against battery overcurrent and overvoltage
* '''Built-in protection against reverse''' connection of battery cells
* Integrated Maxim's fuel-gauge systems for reading battery voltage and percentage over i2c
* On-board LEDs indicate battery charging and discharging levels of 25%, 50%, 75%, and 100%
* Features a 4-cell 21700 battery holder, supporting up to 20,000mAh with four 21700 batteries
|-
|'''Power Input'''||
* Integrated high-efficiency step-down DC-DC converter
* Wide operating input range of 9V to 18V, strongly recommen [[PSU60 | Geekworm 12V 5V Power supply]]
* Up to 95% efficiency for optimal power conversion
<!--* Provides up to 5.5A output current, enabling 3A fast charging while powering the system-->
* The power supply with DC jack can get up to 10A input current, which can achieve 3A fast charging while powering the system. Of course, this also depends on the DC power adapter you use. A good quality power adapter is very important.
* Allows power input from various sources such as a car, solder panel, and more
* Common power input jack size of 5.5x2.1mm
* '''No longer provides TYPE-C charging port'''
|-
|'''Power Management'''||
* Seamless power switching between backup power and power adapter
* On-board push button performs the same actions as the '''RPi 5''''s power button
* Automatically cuts off power when the Pi is shut down
* On-board LED indicates power status and Pi detection
* AC power loss and power adapter failure detection via GPIO
* Auto power-on when power is applied or restored
* Automatic safe shutdown when battery voltage is low (programmable)
* Ultra-low standby power consumption to maximize battery life
* Advanced system power-path management to minimize frequent charging and discharging of batteries
|-
|'''Misc'''||
* Connects to the Pi via convenient pogo pins, eliminating the need for additional cabling
* Designed to be attached on the bottom, allowing the use of favorite HATs alongside it
* XH2.54 connector available for adding your own power button
|-
|'''Power Supply Tips''' || 
* The Wide 6-18V Input allows the user to choose the power supply flexibly. The required current is greater than or equal to 3A.
* The reserved 6-18V XH2.54 connector provide convenient power supply when integrate this ups shield with other products.
* <span class="tb_red">A good quality power adapter is very important,Most of the problems you encounter are usually caused by using a poor quality power supply.Strongly recommen [[PSU60 | Geekworm 12V 5V Power supply]]</span>
|-
| '''Notes''' || 
* <span style="color:red">Only DC Jack power is enough, '''DON'T apply''' power to your Raspberry Pi 5 via the Type-C USB socket.</span>
* Do not use 21700 battery with built-in protection circuit.
|}

==Technical specification==
{| class="wikitable"
|- Power input || 9-18Vdc ≥3A, (12Vdc 3A power adapter recommended)
|-
| '''UPS output''' || 5.1V ±5% Max 6A
|-
| '''Battery charging current''' || Max 2.3-3.2A
|-
| '''Terminal Battery Voltage''' || 4.23V
|-
| '''Battery Recharge Threshold''' || 4.1V
|-
| '''Ports & Connectors''' ||
*DC power jack - 5.5x2.1mm
*4-cell 21700 battery socket x1
*5.1V Power output connector x2 - XH2.54 2-pin
*USB2.0 type-A power output socket x2
*External power button connector x1 - XH2.54-2P
|-
| '''PCB Size''' || 108mm x 85mm
|}

==Packing List==
*1 x X1206 UPS Shield
*4 x CM2.5*4 screws

==User Manual==
* Hardware Installation: 
* How to make it work:

==FAQ==
<!-- 这里提供了一个Q&A的模板，增加Q&A时按照下面的格式写就可以了 -->
<div class="toccolours mw-collapsible mw-collapsed">
<div style="font-weight:bold;line-height:1.0;">
Q1: Question 1
</div>
<div class="mw-collapsible-content">
A: Place the answer here.
</div>
</div>

<!--Add review function! -->
<comments />

<!--Please choose the  -->
<!--Remove other categories, just keep the appropriate categories -->

[[Category:Product Manual]]
[[Category:Raspberry pi]]
[[Category:Jetson Nano]]
[[Category:Arduino]]
[[Category:ESP32]]
[[Category:Consumer Electronics]]
[[Category:LattePanda]]
[[Category:Orange Pi]]
[[Category:Smart Home]]
[[Category:Knowledge]]