View source for X1000

{{GD Template Impl}}
[[File:IMG-7382-ACT-LED-NEW.jpg|thumb|right|X1000 V1.5: NVME M2 2230/2242 SSD Shield for Raspberry Pi 5]]
[[File:X1000-IMG-6914.jpg|thumb|right|X1000 V1.3 is SOLD OUT]]
[[File:Supported-SSD-1.jpg|thumb|right|X1000 Supported SSD]]
[[File:X1000-IMG-6924.jpg|thumb|right|X1000 V1.x: NVME M2 2230/2242 SSD Shield for Raspberry Pi 5]]
[[File:X1000-IMG-6925.jpg|thumb|right|X1000 V1.x: With 40P pin header, can be laminated with other HAT boards.]]
[[File:X1000-IMG-6933.jpg|thumb|right|X1000 V1.x: Compatible with official active cooler]]
[[File:X1000-IMG-7384.jpg|thumb|right|X1000 V1.5 rear view]]
==Overview==
The X1000 shield is an NVME M2 2242 SSD PIP (PCIe Peripheral Board) for the Raspberry Pi 5 that uses the new PCIE interface of the Raspberry Pi 5 to utilise the NVME M2 SSDs for fast data transfers and ultra-fast booting.

This shield follows the new "PIP" [https://datasheets.raspberrypi.com/pcie/pcie-connector-standard.pdf design guideline] from Raspberry Pi fundation ensuring that it will be easy to use and be supported long term by updates to Raspberry Pi OS - though it is very early days and things are improving rapidly there!

{{PCIe to NVME Sets}}

== Important Notes==
{{NVMe SSD Incompatibility List}}

==Features==
* Compatible with other HAT shield;
* FFC is only 30mm length.
* Supports installation of official active coolers also;
* With ''ACT'' LED Indicator; '''On: Power OK/Standby,Flashing: Reading/Writing'''
* Reserved space for POE module installation
* Supports 2230/2242 NVME M2 SSD only.
* Can Power the X1000 shield directly from the FFC PCIe ribbon (providing maximum 5W of continuous power)
* With 40pin pin header, it can automatically supply power from GPIO, avoiding the problem of insufficient power supply for ultra-large capacity SSDs.

'''PS''': 

# The X1000 hardware has no limit on NVME SSD capacity, which is dependent on the Raspberry Pi OS.
# Do not reserve the nut column to fix the 2230 SSD, users need to find proper way to fix the 2230 SSD.

==How to Power==
Can power the X1000 shield directly from the FFC PCIe ribbon (providing maximum 5W of continuous power)

==Test Reviews==
Reter to [[X1001#Test Reviews]]

==Packing List==
* 1 x X1000 V1.3 NVMe SSD Shield
* 1 x PCIe FFC Cable(30mm length)
* 3 x M2.5x14.5mm F/F Spacers
* 6 x M2.5x5mm Screws
* 1 x M2x4mm Screws (to fix MVME M2 SSD)

[[File:X1000-IMG-6909-packing-list-2.jpg|800px]]

==User Manual==
* Dimensions source file (DXF): [[File:X1000-PCB-V1.5.dxf]] - You can view it with [https://viewer.autodesk.com/ Autodesk Viewer] online
* X1000 hardware description: [[X1000 Hardware]]
* X1000 software tutorials: [[NVMe SSD boot with the Raspberry Pi 5]]
* [https://datasheets.raspberrypi.com/pcie/pcie-connector-standard.pdf Raspberry pi 5 pcie connector pin out]

===Video Guide===
Installation Video of X1000
https://youtu.be/lj4A27JHJwM
{{#ev:youtube|https://youtu.be/lj4A27JHJwM}}

X1001/X1001/X1002 Test Video by leepsvideo
https://youtu.be/XMA8e4r1AUQ
{{#ev:youtube|https://youtu.be/XMA8e4r1AUQ}}

Which NVMe drives work with a Raspberry Pi 5?
https://youtu.be/3mUgVTBmKio
{{#ev:youtube|https://youtu.be/3mUgVTBmKio}}

==FAQ==
{{X100x-FAQ}}

<!--Add review function! -->
<comments />

<!--Please choose the  -->
<!--Remove other categories, just keep the appropriate categories -->

[[Category:Product Manual]]
[[Category:Raspberry pi]]