View source for ICE Tower Fan

{{GD Template Impl}}
[[File:Comparison.jpg|thumb|Ice tower CPU Cooling Fan - Comparison]]
[[File:Ice-power-fan-20200114150310.jpg|thumb|Ice-power-fan-Vertical-Front Viewl]]
[[File:Ice-power-fan-20200114150308.jpg|thumb|Ice-power-fan-Vertical-Back View]]
[[File:EP_0112_PI4.jpg|thumb|Ice-power-fan-horizontal-Back View]]

==Overview==
There are two types of ice tower cooling fan, Vertical ice tower fan and horizontal ice tower fan.

The ICE Tower CPU Cooling Fan is a Raspberry Pi cooler which specially designed for Raspberry Pi 4 Model B, Raspberry Pi 3 Model B+(Plus) and Raspberry Pi 3 Model B to solve the Raspberry Pi heat dissipation problem.

This ice tower cooler is tower structure, 5mm copper tube, multi-layer heatsinks, 7 blades powerful fan, all the above combinations make this super radiator for Raspberry Pi.

In the case of overclocking, this cooling fan with heatsink can reduce the temperature of the Raspberry Pi from 80℃ to 40℃.

When the fan turns on, there will be 7 colors show up, it looks very beautiful.

==Features==
* Color LED fan with automatic color change
* Single-stack tower-style heatsink
* DC 5V Power in (Can be powered by the Raspberry Pi)
* 5mm copper tube
* Super heat dissipation
* Rated power 0.4W @5V, 0.08A
* Easy to setup
* Acrylic protection panel
* Plug and play

==Packing List==
'''Packing List(Vertical):'''
* 1 x Ice Tower Cooler
* 8 x M2.5x6+6 Copper Stick
* 4 x M2.5 Nuts
* 4 x M2.5x6 Screws
* 2 x M2.5x4 Screws
* 3 x Thermal Tapes
* 1 x Screw Driver
* 2 x Steel Mounting Fixers (For 3B/3B+/4B)
* 1 x Acrylic protection panel
* 1 x Instructions

'''Packing List(horizontal):'''
* 1 x Ice Tower Radiator and Fan
* 8 x M2.5x6 Copper sticks
* 6 x M2x6 Screws
* 4 x M2.5 Nuts
* 3 x Thermal Tapes
* 1 x Screw Driver
* 2 x Steel Mounting Fixers (For 3B/3B+/4B)
* 1 x Acrylic protection panel
* 1 x Instructions
<span style="color:red>Note: The Raspberry Pi motherboard is not included in the packing list.</span>

==FAQ==
'''Q1: Can it be install to my retroflag case?'''

A: No, the dimension is too big. 
 

'''Q2: How many degrees can be decreased ?'''

A: We've tested it at room temperature 25℃, it can decreased about 40℃.
 

'''Q3: Does it easy to assemble?'''

A: Yes, it is very easy to install, we've provided an instruction for you.
 

'''Q4: How to install with Raspberry Pi 4 Model B'''
A: 
# Fixed the steel mounting fixer to radiator's heat dissipation cube with M2.0 screws  
# Fixed the steel mounting fixer to Raspberry Pi 4B’s mounting hole with M2.5 copper stick, and please make sure the heat dissipation is contact to CPU shield properly.  
# Fixed the copper stick to Raspberry Pi with M2.5 nuts.  
# Connect the red wire to GPIO 5V pin and black wire to GPIO GND pin. 


'''Q5: How to install with Raspberry Pi 3 Model B+'''
A: 
# Fixed the steel mounting fixer to radiator's heat dissipation cube with M2.0 screws
# Fixed the steel mounting fixer to Raspberry Pi 3B+’s mounting hole with M2.5 copper stick, and please make sure the heat dissipation is contact to CPU shield properly.
# Fixed the copper stick to Raspberry Pi with M2.5 nuts.
# Connect the red wire to GPIO 5V pin and black wire to GPIO GND pin.

==Document==

<!--增加评论功能！ -->
<comments />

<!--请选择合适的分类，多余的分类请删除； -->

[[Category:Product Manual]]
[[Category:Raspberry pi]]