Comments log

Jump to navigation Jump to search

This is a log of comments.

Logs
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
  • 14:12, 1 July 2020 87.104.16.13 talk posted a new comment on X825 (Hi! It seems that board X825 v. 1.5 Doesnt support the TRIM command is that the case ? Brian)
  • 22:29, 30 June 2020 45.89.175.126 talk posted a new comment on X872 (Hi! The transfer rate between the NVMe SSD and the RPi 4 will be limited by the USB3.0 gen.1 connection, rated at 5Gbits/sec. Is this correct? Thanks)
  • 21:23, 30 June 2020 91.84.191.182 talk posted a new comment on X735 (Before using the X735 v2.1 I plunged it into a working Pi4B. Using the momentary power button(external one and nothing so used the PCB button), no jumpers connected, no PSU connected to the Pi, it behaves like this:- 1 Pressing power button Pi powered up, fan and lights on X735 on Pi good. 2 Pressing the power button 1 to 2 secs nothing, no flashing LED's and no action. 3 Pressing the power button 3 to 4 secs all powered off Pi and X735 as if I had pulled the plug and no flashing LEDs I don'...)
  • 16:40, 30 June 2020 Cindy talk contribs posted a new comment on X829 (Hello sir, The 2.5" SSD/HDD capacity is no limit, but SSD thickness is limited by the standoffs height.HDD1 thickness Max 11mm, HDD2 thickness Max 12mm.)
  • 03:16, 29 June 2020 193.28.61.1 talk posted a new comment on X829 (What height of 2.5 Inch disks does it support?)
  • 10:08, 28 June 2020 Harry talk contribs posted a new comment on Wireless USB adapter (Thanks.)
  • 20:21, 27 June 2020 94.210.102.112 talk posted a new comment on X735 (After installing the Raspberry Pi 4B in the enclosure with X735 and 2 X828 and this script the raspberry with buster 4.19.118-v7l+ does not respond anymore to the sudo reboot command. Instead it does a halt, at least it seams that way. Before the Pi 4B responded normally. The sudo poweroff works normally, but I need a reboot from remote.)
  • 17:52, 27 June 2020 Danperryy talk contribs posted a new comment on Raspberry Pi DIDO Board (I can not comprehend how you would not publish a schematic of at least the I/O interface pins of the DIDO board. Are there clamping didoes to both rails? What are the values of the input resistors? What to the open collector outputs look like? What current will the outputs drive? What is the max vcc on the output pins? I won't buy another Geekworm product.)
  • 15:09, 26 June 2020 Harry talk contribs posted a new comment on T200 (Please refer to T200_software)
  • 15:09, 26 June 2020 Harry talk contribs posted a new comment on T200 (Please refer to T200_software)
  • 17:21, 25 June 2020 125.136.173.179 talk posted a new comment on X728 (Why does the Raspberry Pi turn on and off repeatedly? The power turns on and turns off after 3 seconds, and turns on again. Is it because the battery is not fully charged? X750 had the same error...)
  • 01:44, 25 June 2020 Isaiahgoveait talk contribs posted a new comment on X835 (I found this picture here on aliexpress selling this. https://imgur.com/a/wuRMaZg)
  • 00:27, 25 June 2020 90.54.149.252 talk posted a new comment on X735 (Have you found a solution to this problem? I have exactly the same concerns. I have rpi4b with an X735 and the X828. My x735 powers my rpi4b and the x828. During a reboot, it goes out correctly but does not come back on. forced to reboot the x828 for the rpi4 to restart.)
  • 09:22, 24 June 2020 Cindy talk contribs posted a new comment on P171 (Hello friend, sorry the information has been uodated now.)
  • 22:46, 22 June 2020 82.65.95.168 talk posted a new comment on X835 (Hi, I have ordered two X835 boards in order to stack them. But I don't think there's enough room for the 3,5 disk if I stack. Also, I don't have the needed screws to "link" them together. Where do I get them? Thanks.)
  • 22:30, 21 June 2020 94.210.102.112 talk posted a new comment on X735 (I have Rasp 4B with 2x X828 and 1x X735 with casing Manual reboot does not work and press the button 1~2 sec. does not work either. System goes down, but no reboot. Is there an solution?)
  • 22:22, 18 June 2020 169.0.209.225 talk posted a new comment on T200 (Hi. Also wondering if there is code to read the battery information via Bat I2c. Thank you)
  • 19:10, 17 June 2020 JesseArmand talk contribs posted a new comment on X728 (I'm running https://raspap.com/ to use the Pi as a wireless hotspot. There was an issue with bringing up the wireless interface on RaspberryPi 3B+, if I short the jumper pin for ASD (Auto Shutdown). If I don't short the jumper, it becomes normal. Has anyone else encountered the same issue?)
  • 19:34, 16 June 2020 91.162.221.188 talk posted a new comment on X820 (Hello, i want know if it's possible to put the device in auto on and how we do that.)
  • 08:15, 12 June 2020 Clintla talk contribs posted a new comment on X400 V3.0 (So its great there is a video to put it together but why no actual instructions? If you install the latest Raspian OS version, how do you get the unit to work? I dont see an option in sound devices as if it has not detected the device)
  • 00:01, 12 June 2020 Mikhail talk contribs posted a new comment on X710 (Hello I received the X710 board, connected to my RaspPi4B, installed the software as recommended above and unfortunately could not make it fully functional: ON works, OFF power cut does too (after 8 sec of holding a button); safe shut down DOES NOT. Any help would be much appreciated!)
  • 22:02, 10 June 2020 190.47.120.32 talk posted a new comment on Raspi UPS HAT Board (Can I use I2C DS1307 RTC with Raspi UPS HAT Board?)
  • 02:00, 9 June 2020 71.192.181.102 talk posted a new comment on X735 (I upgraded to the X728 and it does not cooperate at all with the X735 script, when i startup this script automatically shuts it down. How do i completely uninstall this script so i can install X728 Script)
  • 01:13, 9 June 2020 96.3.33.36 talk posted a new comment on X750 (Will the X750-A2 power up & work if there are no batteries X750, But I have 12 batteries in the 3 A-2 boards?)
  • 07:12, 6 June 2020 79.77.210.114 talk posted a new comment on X728-hardware (No, correction, it reads thus : From the Power jack end : PLD (Power loss detection) AON (Auto On) is the middle pair. ASD (Auto shutdown) is nearest the USB-C Connector.)
  • 14:29, 4 June 2020 Harry talk contribs posted a new comment on T200 (Yes. one battery is ok also.)
  • 02:17, 4 June 2020 79.77.220.185 talk posted a new comment on X728-hardware (Pin assignments for the jumpers are printed on the underside of the board at least! : From the Power jack end : AON (Auto On) PLD (Power loss detection) ASD (Auto shutdown) to nearest the USB-C Connector)
  • 10:02, 3 June 2020 125.136.173.179 talk posted a new comment on X750 (Is there a way to manage power with some code instead of a switch to manage power? For example, Is there any way to safely shut down the Raspberry Pi when the power supply is interrupted? How can I do this?)
  • 17:40, 2 June 2020 Zakukashi talk contribs posted a new comment on 2.8 inch Touch Screen for Pi zero (Hello, I connected this screen to my PI Zero, everything works great with colors and brightness etc.. However my screen seems to have permanent black lines in a weird circle configuration. Almost looks like artefacts left from someone drawing on the screen. How can I remove this? IT seems to be always there, even when PI is booting I can see the lines "stuck". Heres what it looks like: https://imgur.com/a/ppxY7Al)
  • 04:01, 31 May 2020 Nahumb talk contribs posted a new comment on X825 (Hi, 2 questions regarding Raspi 4 WiFi performance (2.5G and 5G): 1. Dose the X825 affect the Raspi 4 WiFi performance? (I see that in version 1.2 there was a metal case around the USB circuits, and it is not there any more on version 1.5. Is it related to RF interference?) 2. To what extent does the metal case affect the Raspi WiFi performance? Thanks, Nahum.)
  • 02:38, 31 May 2020 182.19.255.57 talk posted a new comment on How to read the battery capacity via I2C on X750&725 (Any discription on the ph2.0 4-pin external power switch? I want to connect to an external switch, but do not know the pin out. Thanks.) Tags: Mobile web edit, Mobile edit
  • 10:51, 30 May 2020 104.148.252.139 talk posted a new comment on X400 V3.0 (metal case looks like it would reduce the wifi)
  • 20:38, 29 May 2020 95.90.242.7 talk posted a new comment on X750 (I want to use a latching switch with the X750. Which one is the correct jumper position? The inner one (it's not that clear to me)? I tried to put a jumper to that inner jumper pins and placed a latching switch at pin 1 and 2 of the "External PWR switch". But the X750 doesn't power up if I switch the latch on. Did I something wrong?)
  • 14:46, 29 May 2020 108.52.57.152 talk posted a new comment on X850 (When will this be compatible with Pi 4 8Gb?)
  • 09:10, 28 May 2020 74.70.203.6 talk posted a new comment on X728-hardware (Which jumpers are which?)
  • 04:54, 28 May 2020 181.121.218.100 talk posted a new comment on X856 (Why is not recommended Samsung brand mSATA?)
  • 16:10, 27 May 2020 193.121.32.249 talk posted a new comment on 2.8 inch Touch Screen for Pi zero (Thanks for your quick answer. Finally, I managed to make it work, the problem was the pi zero, it was giving only 3v to the screen. I tried with other pi zero and it works perfectly when I use raspbian. I tried to use RetroPie (I want to create a portable console) but I don't manage to make it work, when I execute the installer I get an error saying that /boot/tmp.dts does not exist and FATAL ERROR. Any ideas about this? Thank you and have a nice day.)
  • 11:28, 27 May 2020 Abby talk contribs posted a new comment on 2.8 inch Touch Screen for Pi zero (Hi, Do you install the driver? Please refer to: https://raspberrypiwiki.com/index.php/2.8_inch_Touch_Screen_for_Pi_zero#For_Version-B If it still not work, please kindly attach some picture to show your installation and steps, and we will reflect to our engineer.)
  • 23:56, 26 May 2020 193.121.32.249 talk posted a new comment on 2.8 inch Touch Screen for Pi zero (Hello. I have just received this screen, model B. I did all the steps that this webpage is saying, but, even with that, it is not working. The thing is that the pi zero is not even booting, the led to indicate it is off. But, magically, when I remove the screen, the pi boots without problem. Can someone help me with this issue. Thank you!)
  • 10:16, 24 May 2020 70.171.103.120 talk posted a new comment on X705 (can I instead use my own battery pack of 6p 18650 3.7v ?)
  • 09:24, 24 May 2020 47.15.134.11 talk posted a new comment on X825 (Is it possible to hook up X825 with ICE Tower cooling fan alongwith the case?) Tags: Mobile web edit, Mobile edit
  • 07:41, 23 May 2020 179.113.7.105 talk posted a new comment on X5000K (Only by DIY. On mine I actually converted the power button into a push-release (by removing the latch) and then I wired it to GPIO pins 5/6 and wrote my own shutdown script that is put to run in the background when the Pi boots up.)
  • 02:25, 23 May 2020 189.128.136.3 talk posted a new comment on X705 (Hi, can the x705 have direct communication with the Raspb? e.g. through i2c?)
  • 02:02, 20 May 2020 83.46.234.177 talk posted a new comment on X735 (I bought two x828 boards and a x735 board for my raspberry pi 4 to connect two hard disks, a Samsung evo 860 (SSD) and a Seagate barracuda (HDD). I've followed the instructions in the videos to assemble all boards with the raspberry and disks and everything works properly except when I want to reboot the system with the command: sudo reboot. The system shuts down but but it doesn't restart and I have to unplug the power adapter to reboot the system. I've tried the raspberry only with x735...)
  • 10:18, 19 May 2020 Abby talk contribs posted a new comment on X825 (Hi friend, Thanks for your message, I will reflect it and add this information in our FAQ.)
  • 07:15, 17 May 2020 78.120.242.173 talk posted a new comment on X825 (My problem was solved after formatting the disk.)
  • 02:58, 17 May 2020 78.120.242.173 talk posted a new comment on X825 (My RaspberryPi freezes when X825 is connected. I have pi 4B, X375, X825 and a samsung SSD.)
  • 08:20, 13 May 2020 67.20.41.30 talk posted a new comment on X735 (ok. I have debugged this setup to this point. GPIO4 is the input from the x735 pertaining to the pressing and duration of the press for the power button. GPIO18 is the output from the Pi board to the x735 to power off. The problem I am seeing is with GPIO17's output. GPIO, in the script is labelled as "BOOT", but I am having an issue following the logic pertaining to the output. I can manually toggle it, and nothing happens. This is where I feel is the disconnect users are having with...)
  • 01:10, 12 May 2020 81.40.48.143 talk posted a new comment on 2.8 inch Touch Screen for Pi zero (Hello. My C versión shows small vertical lines forming a circle. Can it be caused by software?)
  • 20:49, 10 May 2020 103.48.100.73 talk posted a new comment on 5V-4 Jog Switch (Sir How to weld or connect switches for individual relay. On board there is “com” and other 4 keys provision. Can we wire them with 4 switches to use when Wifi is giving problem. Pl guide Regards Vijay. ( ganganvv@gmail.com ))
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
Retrieved from "https://wiki.geekworm.com/Special:Log/comments"