X630-Hardware-Reset
For Hardware Reset - Starting RASPISTILL or RASPIVID once then reboot your Raspberry Pi.
Use RASPISTILL RASPIVID
(Please use when operating system cannot control the X630 module via GPIO509)
13. To take a photo with the X630 Module
raspistill -o image.jpg
Here, "image" is the name of your image that will be saved to your Raspberry Pi
14. If you need to take second image, then you will need to reboot the Raspberry Pi and execute the "raspistill" again
sudo reboot
15. To record a video with the X630 module
raspivid -o video.h264 -t 10000
Here, "video" is the name of your video and "10000" is the number of milliseconds.
16. If you need to record second video, then you will need to reboot the Raspberry Pi and execute the "raspivid" again
sudo reboot
For Hardware Reset - Starting RASPISTILL or RASPIVID once then reboot your Raspberry Pi
Please use the following guide if your dip switch is changed to 'Hardware reset' position.
17. To take a photo with the X630 Module
raspistill -o image.jpg
Here, "image.jpg" is the name of your image that will be saved to your Raspberry Pi
18. If you need to take second image, then you will need to reboot the Raspberry Pi and execute the "raspistill" again.
sudo reboot
19. To record a video with the X630 module
raspivid -o video.h264 -t 10000
Here, "video" is the name of your video and "10000" is the number of milliseconds.
20. If you need to record second video, then you will need to reboot the Raspberry Pi and execute the "raspivid" again.
sudo reboot
Enable comment auto-refresher