X12-A1

Overview

The X12-A1 is a 4-cell parallel 18650 battery holder designed to accommodate four 18650 batteries. Each battery is protected by a resettable ultra-low resistance fuse to prevent over-discharge. It features four XH2.54 connectors for easy integration with UPS HAT models such as the X1209 and X1203, and supports a stackable design, allowing for capacity expansion through multiple bases.

Features

• Parallel Capacity Expansion: Can accommodate four 18650 batteries connected in parallel, directly increasing power supply capacity.

• Independent Protection: Each battery is equipped with an ultra-low internal resistance resettable fuse to prevent over-discharge.

• Plug and Play: Provides four XH2.54 connectors, compatible with specified UPS HATs, requiring no modifications.

• Stacking Design: Supports multiple stacks (requires the X12-A1 stacking kit), flexibly expanding total power capacity.

• Compatible Models: X1209 UPS HAT (top-mounted Raspberry Pi), X1203 UPS HAT (bottom-mounted Raspberry Pi).

• Core Application: The X12-A1 provides a backup battery expansion solution for the aforementioned UPS HATs.

Technical specification

Battery Model	18650 (protection board required)
Battery Quantity	4 cells in parallel
Output Interface	XH2.54 2Pin parallel interface x 4
PCB Dimensions	93.9mm x 77.1mm

Packing List

• 1 x X-FAN40 V1.0 PWM Controlled Fan HAT
• 4 x Spacer M/F M2.5x12mm
• 4 x Spacer F/F M2.5x20mm
• 8 x Screw M2.5x5mm

User Manual

• X-FAN40 Hardware Guide:X-FAN40 Hardware
• X-FAN40 Software Guide:X-FAN40 Software

FAQ

Q1: Question 1

A: Place the answer here.

Add your comment

Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.

Sort by date Sort by score

Enable comment auto-refresher