X12-A1
Overview
The X12-A1 is a 4-cell parallel 18650 battery holder designed to accommodate four 18650 batteries. Each battery is protected by a resettable ultra-low resistance fuse to prevent over-discharge. It features four XH2.54 connectors for easy integration with UPS HAT models such as the X1209 and X1203, and supports a stackable design, allowing for capacity expansion through multiple bases.
Features
- Parallel Capacity Expansion: Can accommodate four 18650 batteries connected in parallel, directly increasing power supply capacity.
- Independent Protection: Each battery is equipped with an ultra-low internal resistance resettable fuse to prevent over-discharge.
- Plug and Play: Provides four XH2.54 connectors, compatible with specified UPS HATs, requiring no modifications.
- Stacking Design: Supports multiple stacks (requires the X12-A1 stacking kit), flexibly expanding total power capacity.
- Compatible Models: X1209 UPS HAT (top-mounted Raspberry Pi), X1203 UPS HAT (bottom-mounted Raspberry Pi).
- Core Application: The X12-A1 provides a backup battery expansion solution for the aforementioned UPS HATs.
Technical specification
4-cell 18650 battery socket x1| Battery Model |
18650 (protection board required) |
| Battery Quantity |
4 cells in parallel |
| Ports & Connectors |
XH2.54 2Pin parallel interface x 4 |
| PCB Dimensions |
93.9mm x 77.1mm |
4-cell 18650 battery socket x1
XH2.54 2-pin Battery connector in parallel x4
Packing List
- X12-A1 Base Kit
- X12-A1 18650 battery holder (4-cell parallel) x1
- 2-pin 2.54mm pitch male-to-male cable AWG18 30cm x2
- X12-A1 Stackable Kit - For use with X12-A1 base kit
- X12-A1 18650 battery holder (4-cell parallel) x1
- 2-pin 2.54mm pitch male-to-male cable AWG18 10cm x2
- Spacer M/F 22mm x4
- Screw M2.5x5mm x4
- Screw nut M2.5 x4
User Manual
- X12-A1 Hardware Guide:X12-A1 Hardware
FAQ
Q1: Question 1
A: Place the answer here.
Enable comment auto-refresher