X12-A1
Overview
The X12-A1 is a 4-cell parallel 18650 battery holder designed to accommodate four 18650 batteries. Each battery is protected by a resettable ultra-low resistance fuse to prevent over-discharge. It features four XH2.54 connectors for easy integration with UPS HAT models such as the X1209 and X1203, and supports a stackable design, allowing for capacity expansion through multiple bases.
Features
- Parallel Capacity Expansion: Can accommodate four 18650 batteries connected in parallel, directly increasing power supply capacity.
- Independent Protection: Each battery is equipped with an ultra-low internal resistance resettable fuse to prevent over-discharge.
- Plug and Play: Provides four XH2.54 connectors, compatible with specified UPS HATs, requiring no modifications.
- Stacking Design: Supports multiple stacks (requires the X12-A1 stacking kit), flexibly expanding total power capacity.
- Compatible Models: X1209 UPS HAT (top-mounted Raspberry Pi), X1203 UPS HAT (bottom-mounted Raspberry Pi).
- Core Application: The X12-A1 provides a backup battery expansion solution for the aforementioned UPS HATs.
Technical specification
| Battery Model |
18650 (protection board required) |
| Battery Quantity |
4 cells in parallel |
| Output Interface |
XH2.54 2Pin parallel interface x 4 |
| PCB Dimensions |
93.9mm x 77.1mm |
Packing List
- 1 x X-FAN40 V1.0 PWM Controlled Fan HAT
- 4 x Spacer M/F M2.5x12mm
- 4 x Spacer F/F M2.5x20mm
- 8 x Screw M2.5x5mm
User Manual
- X-FAN40 Hardware Guide:X-FAN40 Hardware
- X-FAN40 Software Guide:X-FAN40 Software
FAQ
Q1: Question 1
A: Place the answer here.
Enable comment auto-refresher